Control valves
- two-way and three-way, DN15 ÷DN250, up to 100 bar, screwed and flanged, body material: cast iron, cast steel or stainless steel
Self-acting temperature control
Valves in sizes DN15 ÷ DN50 (DN80) are used as:
- NO in heating systems
- NC in cooling systems.
Pressure reducing valves
- with the direct acting, DN15 ÷ DN100, for pressures up to 40 bar, for water, steam and gas, body material: bronze, cast iron cast steel or stainless steel
Ball steam traps
To drain the condensate from the plant with automatic temperature control. Are effective in small and large quantities of condensate. Capacity of condensate drainage is large and continuous, which ensures a steady heat transfer from the steam to the media.
Read more
22Jul/13
Inverter for solar power plants
Inverter (converter) is a power electronic device and is a central element of the solar power plant connected to the grid. It converts a DC current produced by solar modules into an AC current (with very small losses) …
Read more
22Jul/13
Photovoltaic moduls for solar power plants
Sunny generator is compiled by the solar modules manufactured in a variety of technologies such as c-Si monocrystalline silicon, mc-Si multicrystaline silicon, Cd / Te cadmium telluride, CIS copper-indium …
Read more
22Jul/13
Standard coils
- voltage 230 VAC, 115 VAC, 48 VAC, 24 VAC, 200 VDC, 24 VDC, 12 VDC
- standard power TM25 (6 W), TM30 (10 W), TM35 (18 W)
22Jul/13
Explosion proof coils
- explosion protection marking II 2 G Ex mb II T4/T5 Gb (certificates ATEX and IECEx)
- voltage 230 VAC/200 VDC, 115 VAC/DC, 48 VAC/DC, 24 VAC/DC
22Jul/13
Water, air, LPG, oil … service valves
- ports 1/2″, 3/8″, 3/4″, 1″, 6/4″, 2″
- nominal orifice size from 10 mm to 50 mm
- pilot operated – diaphragm (0,3 bar …
22Jul/13
Gas service solenoid valves
- process valves and safety shut-off valves (to be used with gas detectors exclusively)
- ports 1/2″, 3/4″, 1″, 6/4″, 2″
- nominal orifice size from 10 mm…